Machine speed:      Up to 25 stacks per minute.

Cup size:                  5-1/2 inches Maximum rim diameter.

Cup stack:                28” Maximum stack length. The number of stacks per bag is adjustable to 1, 2 or 3 by a selector switch.

Counter:                   A counter wheel is supplied, custom made for a specific product and count.

Film:                          The machine will run centerfold printed or unprinted Polyethylene film from ¾ to 4 mil thickness. A vacuum take-away system for film edge trim is standard, with a film edge trim winder available. The ejection bin has the storage capacity for production to accumulate during film roll changes.

Sealer:                      The machine is equipped with a heat sealing knife blade with a thermocouple and temperature control system to maintain consistent blade temperature.

Compressed air:     Compressed air supply is a minimum of 80 PSI, with consumption of 0.25 ft³ per cycle. Compressed air valves are”Numatic” brand unless otherwise specified.

Controls:                   Programmable Logic Controller with custom software.

Electrical:      

Power:                       480V, 3 Phase, 15A

                                   240V, 3 Phase, 20A

                                   240V, 1 Phase, 25A

Control:                     120V, 60 Hertz

                                   240V, 50/60 Hertz

                                   Other Voltages available on request.